Bathroom faucet installation steps and precautions

Whether it is outdoors or indoors, there are faucets. When the bathroom faucets in the home are used for a long time, some faucets start to strike, and there are a series of problems such as water leakage. At this time, we need to replace the faucets. Asking the master is also an expense. Installing bathroom faucets yourself is a good option. So, how to install various faucets?

1. Users with small solid blocks in tap water are not suitable for using thermostatic faucets;

2. If the tap water contains powdery sediment or soft foreign matter, it may reduce the sensitivity of the thermostatic valve core, and may also shorten the service life of the thermostatic faucet;

3. Try to shorten the distance between the water heater and the faucet so that the hot water can reach the faucet as soon as possible;

4. The normal operating water pressure is 0.05Mpa～0.6Mpa;

5. The hot and cold water supply pipes must not be installed wrongly, the hot water pipe must be on the left, and the cold water pipe must be on the right;

6. Be sure to clean the installation site before installing the thermostatic faucet, so as not to damage the rubber ring, thread, thermostatic valve core, and other parts of the faucet with small sand and stone blocks;

7. Please install according to the instructions of the manual, pay special attention not to leaking. Loss or damages to any gasket or rubber ring;

8. The thermostatic faucet itself has no heating function, please adjust the water temperature of the water heater to 60°C ~ 85°C;

9. Showers and shower pipes cannot withstand high temperatures above 60°C;

10. After each use, be sure to adjust the water temperature adjustment knob on the left to below 40°C;

11. If the water pressure of hot water and cold water is too different, please use a screwdriver to adjust the valve of the bracket. Families using gas water heaters need to pay more attention to this.