How to Install Kitchen Faucet Correctally

Step 1: Under normal circumstances can not disassemble the tap, especially the valve core part of the faucet (the product has been quality testing and testing before the factory).

Step 2: The tap should thoroughly rinse the water supply pipe before installation, so as not to block the water .

Step3: The installation of the kitchen faucet shall be carried out according to the product installation size map to ensure that the installation is correct, and the tap and other components cannot be damaged by force installation.

Step 4: The connection to the hot and cold water pipe must be correct at installation: face the faucet, take hot water on the left, and take cold water on the right.

 Step 5: When the water inlet hose is connected to the angle valve, use a wrench or other tool to gently tighten the water without seeping; During installation, the inlet hose should not be severely bent or twisted to avoid damaging the hose structure and affecting the water supply performance.

  Step 6: .After the faucet is installed, it is necessary to check for leakage at each connection.